Concrete mixer installation method of the most detailed

2013-05-28 16:31:11

Note a concrete mixer installation

The stirring leaf inclination angle of
1 concrete mixer to be consistent, not anti-loaded;
2 mixing leaf inclination angle is too large or too small will affect the mixing production, so the blade and the stirring axis inclined at 70 degrees or 80 degrees;
3 mixing angle is rotated to the upper leaves with clay 20-30mm;
4 two axes of stirring blades phase with paint will be relatively shifted in phase by 90 degrees in;
5 installation of stirring blades must be tightened, should try to tighten the stirring head with a nut on the leaves;

Repair methods two concrete mixer:

The main reasons for the damage of concrete mixer mixing blade is:

The 1 blade wear, it is necessary to edge cutting torch oblique blade cutting Qi, and then use the same and leaf thickness steel plate cut into required size welding to leaf residue;

Bent or broken 2 petioles, the cause of these two kinds of circumstances are:
(1) concrete mixer petiole strength is not enough, then increase the petiole diameter, round processing;
(2) concrete mixer petiole more brittle material, it can be changed to ordinary steel.